Thermal Grizzly PhaseSheet PTM 50x40x0.2mm Phase Change Material Thermal Pad Paste

Thermal Grizzly PhaseSheet PTM 50x40x0.2mm Phase Change Material Thermal Pad Paste

Silahkan bertanya apabila anda tidak mengerti produk ini karena kami tidak menerima RETUR karena salah beli atau tidak mengerti cara pemakaiannya.

Thermal Grizzly PhaseSheet PTM merupakan Thermal pad yang mengunakan bahan Phase Change Material (PCM) sehingga dapat berubah menjadi Liquid/Gel State di kondisi panas dan akan kembali menjadi padat di kondisi dingin. Produk ini sangat mudah aplikasinya dan juga non Conductive sehingga aman untuk produk elektronik dan tidak membuat konslet.

Produk ini bisa di potong menggunakan gunting tajam agar tidak rusak dan di sesuaikan dengan ukuran yang mau di gunakan. Silahkan ikuti langkah pemasangan yang tersedia di manual book dalam paket penjualan.

High Performance Cooling Solutions With the PhaseSheet PTM, Thermal Grizzly presents a new thermal pad based on a phase change material (PCM). The pads, which are solid at room temperature, can be easily applied and liquefy during operation, allowing them to effectively dissipate heat like a thermal paste. PhaseSheet PTM is electrically non-conductive and can therefore be used in many areas, with the primary application being in processors and graphics chips

-Outstanding thermal conductivity
-Consistently high performance
-Very long service life
-Versatile in application
-Not electrically conductive
-Easy to use

PhaseSheet PTM is a thermal pad that has been optimized for applications where maintenance cycles are subject to a high interval duration. It is more durable than traditional thermal conductive pastes, but not as durable as KryoSheet, for example, which is virtually maintenance-free. The maximum thermal conductivity of PhaseSheet PTM develops and stabilizes after around ten thermal cycles over 60 degrees Celsius.

The phase-change material on which the PhaseSheet PTM is based is solid at room temperature. The material only begins to liquefy at temperatures above 45 degrees Celsius. A high contact pressure of around 300-400N is required for optimum spreading of the liquid PhaseSheet PTM and thus the lowest possible layer thickness. Compared to traditional thermal paste, PhaseSheet PTM retains a very low viscosity in its liquid state and contracts again when it changes to a solid, so that the so-called “pump-out” effect is only very slight.

With the pump-out effect, the thermal paste is slowly pressed out between the heatspreader and the base plate of the CPU cooler, for example, because the heatspreader and the base plate deform (concave or convex) due to the temperatures under load and are returned to their original shape (straight) when they cool down.

Technical data
Color: Grey
Electrically conductive: non-conductive
Operating temperature: -75°C to 150°C
Typical Application: Thermal pads for processors and graphics chips
Length: 50 mm
Width: 40 mm
Height: 0,2 mm
Package size: 21 x 15 x 1,5 cm
*Gross weight: 21 g
*Net weight: 2 g

CATATAN PENTING :
* Stock terbatas, silahkan konfirmasi terlebih dahulu sebelum membeli.
* Barang Baru.
* Harga belum termasuk ongkos kirim.
* Disarankan menggunakan asuransi.
* PRODUK INI TIDAK ADA GARANSI dan TIDAK BISA RETUR
* Silahkan sertakan Video Unboxing dari awal terima barang saat melakukan komplain, Tanpa video Unboxing kami tidak akan menerima komplain kekurangan dan kerusakan apapun.
* MEMBELI BERARTI ANDA SUDAH MEMBACA DAN SETUJU DENGAN ATURAN INI.